click to enlarge

Medela Pump In Style® Double Electric Breast Pump Starter Set

This product may be covered through insurance

Fill out our Qualify Through Insurance Form to see if you're eligible!

$359.99

In stock

Description

Contents

  • (1) Double Electric Breast Pump
  • (2) 24 mm PersonalFit Breastshields
  • (2) PersonalFit Connectors
  • (2) Valves
  • (2) Membranes
  • (2) Tubing
  • (2) Bottles and Lids
  • (1) 9 Volt AC Adaptor

Additional information

Brand

Medela

Electric/Manual

Electric

Single/Double

Double

FAQ's

  • How should you clean the pump?
    • There are detailed instructions on cleaning the pump in the product manual under the “Product Manual” tab.
  • What does it mean when the Symphony reads, “invalid card?”
    •  When the Symphony message reads, “invalid card” it could mean that the card in the pump is not the correct program card; the card could be damaged or the card is not inserted correctly. Unplug the pump and remove the card. Check the card to make sure it is the correct card and also check for damage. Replace if necessary. Make sure the card is inserted in the direction of the arrows and the arrows are visible. Plug in the pump and press the let-down button and the power button at the same time. Hold for several seconds and release. Try the pump again. If this does not correct the problem, the pump would need to be sent back the rental station for return to Medela.
  • How long will the Symphony operate before it automatically shuts off?
    • The Symphony automatically shuts off after 30 minutes with both battery and electric operation.
  • What should I do if my milk is already flowing when I start pumping?
    • Use the individual setting and press the “let-down” button to directly use the expression mode.
  • Can the protective membrane be boiled?
    • Yes, the Symphony Protective Membrane can be boiled without harm.
  • Why does the cover pop off the Symphony pump while I’m pumping?
    • If the Symphony cover pops up while you are pumping, it may be due to an obstruction in the tubing.
  • What functions do the knobs perform on the Symphony?
    • The button all the way to the left is the on/off button. The knob in the center of the unit controls the suction and speed. The button all the way to the right is the “let down” button. This button interrupts the first phase (stimulation phase) so you can go right to the expression phase without waiting for the 2 minute stimulation phase to end.
  • What do I do if milk gets in the tubing?
    • What do I do if milk gets in the tubing?  

      Inspect tubing after each pumping session. Clean tubing if there is any sign of condensation and/or milk.  

      CAUTION: If tubing becomes moldy, discontinue use and replace tubing.  Shop Tubing

      CAUTION: Do not store wet or damp parts as mold may develop. 

      NOTE: Tubing should be washed if dirty or milk is present. 

      1. Turn off breast pump
      2. Unplug breast pump from power source.
      3. Remove and disassemble the tubing, protective membrane and membrane cap.
      4. Remove tubing from breast shield.
      5. Rinse tubing in cool water to remove breast milk.
      6. Wash tubing in warm soapy water.
      7. Rinse tubing with clear water.
      8. Hang to air dry.
Shopping Cart
There are no products in the cart!
Subtotal
$0.00
Total
$0.00
Continue Shopping
0